AEM Electrolyser

Multi core water electrolysis hydrogen production device-AEM Nexus

No hydrogen oxygen separation device is required, only a dryer is needed to achieve 99.999% purity. If you need 99.9999% high-purity hydrogen, you only need to add one dryer.

Characteristics of AEM electrolysis module

Quick start

Deploy MW-scale green hydrogen without the wait. This ready-made electrolyser offers you quick and easy setup so you can focus on making and using your green gas. It is designed to unlock both on-grid & decentralised appli- cations, delivering on-site hydrogen where you need it.
Multiple AEM hearts

AEM Stack electrolyser cores are the heart of our green hydrogen generators. Our AEM Nexus has hundreds, mounted in strings of 10. Each string ramps up or down separately to get the most out of your renewable energy at any energy load, giving massive system flexibility.
Maximum uptime

Resilience you can rely on: The modular design removes bottlenecks and single points of failure, all the way from AEM stacks to balance of plant. Enjoy maximum uptime, even when servicing: Work on individual strings of AEM Stacks while others still make green hydrogen.

Condition

Ambient operating temperature

-15℃～+35℃
Operational flexibility

3% – 100%
H₂ outlet temperature

5 – 55 °C

Specification

H₂ nominal flow	200 Nm³/h （428kg/24h）
H₂ outlet pressure	Up to 35 barg (507.63 psig)
H₂ purity	99.95% in molar fraction
H₂ purity with optional dryer	99.999% in molar fraction
Nominal power consumption	960 kW Beginning of life (BOL)
Voltage	3 × 400 VAC ± 10 %
Frequency	50/60 Hz ± 10 %; THD < 5 %
H₂O nominal consumption	190 L/h (50.19 gal/h) Purified water
H₂O inlet quality	Minimum ASTM D1193-06 Type IV or recommended Type II or Type III
Hot startup time	0 – 100% in 100 seconds
Cold startup time	0 – 100% in 20 minutes
Dimensions	1200024282896mm(L × W × H)